(€12.99 /m²)
2 m wide PVC roll with a checker-plate relief in light pearl grey. 2 mm, 0.3 mm wear layer, class 32, BFL-S1. 60 m² roll or cut to the linear metre.
The light version of our ribbed series: a near-white pearl grey that gives light back instead of absorbing it. It is what we recommend for storage rooms, garages and basements with poor lighting, where a dark floor forces you to run more fittings than you need.
This colour exists in two finishes: ribbed — the one on this page, with a chequered pattern and more wet grip — and studded, with circles and easier cleaning. If your area gets wet, choose ribbed; if it is a dry, busy area, studs will give you less maintenance work.
2 m wide by 30 linear metres, also cut to size, with seams heat-welded using welding cord. Compare with the Silver Grey 7046 stud version or with Sand Beige 1019 ribbed. Full range under commercial vinyl flooring rolls.
Data sheet
Here you can add custom original content(text, images, videos and more) for each product page.
4 other products in the same category:
Checker-plate relief in sand beige The relief reproduces the pattern of steel tread plate: crossed groups of ribs forming a chequered field. In sand beige the result is considerably warmer than the greys usually seen in this type of flooring,...
Stud pattern in silver grey The classic studded floor — raised circles on a regular grid — in a light silver grey that keeps the space bright. The relief does two jobs: it gives grip underfoot and it disguises dust and marks between cleans, which...
So the floor stays continuous When several strips of roll flooring are laid, the seams are closed by hot-welding them with this cord: the joint is routed out, the cord is applied with a hot-air gun and then trimmed flush. The result is a...
Green-grey, checker-plate relief A grey with a slight green cast — sober and neutral. It is a common shade on machinery, metal shelving and service doors, so the floor blends in with the equipment instead of standing out. It hides dust and...
Viewed products
Studs in dark graphite grey A studded relief — circles on a regular grid — in a deep graphite grey. It is the middle ground between Black 017 and Silver Grey 7046: dark enough that dirt does not show, grey enough that the room does not close in....
Mid-tone natural oak 8089-3 is the all-rounder of the collection: a natural oak that is neither light nor dark, with soft, low-contrast grain. That is exactly why it works in almost any project — white kitchens, living rooms with dark furniture,...
error Your review appreciation cannot be sent